Development of large thickness NM400 wear-resistant steel plate for wood-based panel equipment
Features of large thickness NM400 wear-resistant steel plate
Large thickness NM400 wear-resistant steel plate has excellent performance such as high strength, wear resistance, corrosion resistance, etc.
①.High strength: NM400 steel adopts advanced quenching technology and special deoxidation treatment. In the engine, the quenching process increases the plasticity of steel and increases its strength. The hardness of steel is also improved, which makes the steel have higher bearing capacity.
②.Good wear resistance: NM400 steel adopts a combination of high-hardness alloy wear-resistant layer and matrix layer. The wear-resistant layer is formed on the surface of the steel plate to prevent the surface of the steel plate from being worn or scratched by external forces. At the same time, the matrix of the steel plate is metallurgically bonded with the surface alloy wear layer to increase the wear resistance of the steel plate.
③.Excellent corrosion resistance: NM400 steel adopts advanced rust-proof technology to make the steel plate very strong in corrosion resistance. The rust-proof treatment makes the steel plate form a stable protective film on the surface, which can effectively reduce the corrosion damage of steel plate.
Application of large thickness NM400 wear-resistant steel plate
Large thickness NM400 wear-resistant steel plate has excellent properties. It can be widely used in the production of each important part of wood-based panel equipment. It can replace traditional wear-resistant steel with lower cost and better wear resistance.
Application example of NM400 wear-resistant steel plate for wood-based panel equipment
Specifically, it can be used for the treatment of cutting tools, chipping knives, gripping surfaces, chipper rolls and other equipment, as can be seen from the figure above.
In addition, as a kind of wear-resistant steel plate with large thickness, it can also be used in some special occasions, such as chipper rolls with high wear load, vertical press steel plate, etc.
Advantages of large thickness NM400 wear-resistant steel plate
Large thickness NM400 wear-resistant steel plate has many advantages compared with other kinds of wear-resistant steel plate.
1.High toughness and strength: The toughness and strength of large thickness NM400 wear-resistant steel plate is high, which can not only effectively bear the impact force, but also maintain a certain bearing capacity in the process of use.
2.Excellent wear resistance: The wear resistance of NM400 wear-resistant steel plate is excellent, and the surface wear resistance is several times higher than that of ordinary steel plate.
3.Good corrosion resistance: The corrosion resistance of NM400 wear-resistant steel plate is good, and the effective corrosion resistance can be maintained for a long time in the process of use.
4.Low cost: The price of NM400 wear-resistant steel plate is low, and its cost performance is higher than that of other wear-resistant steel plates of the same specification.
NM400 wear-resistant steel plate Conclusion:
Large thickness NM400 wear-resistant steel plate has excellent performance, high strength, good wear resistance, excellent corrosion resistance and low cost. It has become an ideal material for wood-based panel equipment because of its high bearing capacity, high impact strength and high wear resistance. In addition, it can also be used in some special occasions, such as chipper rolls with high wear load, vertical press steel plate and so on.
Conatct us
