Thermal deformation behavior of a low-alloy wear-resistant steel for forged bucket teeth
When exposed to high temperatures, steel undergoes a variety of changes such as reduction in hardness, increased ductility and elasticity, reduced impact resistance and higher fatigue limit. These changes result in the general softening of the steel. The thermal deformation behavior of any steel ultimately depends upon its chemical composition, heat treatment parameters, microstructure, and grain size distribution, among other characteristics.
The thermal deformation behavior of a material is typically measured in terms of temperature or strain. Temperature–strain behavior can be measured by simultaneously monitoring the temperature and strain of the steel sample as a function of temperature, or as a function of strain rate.
Wear-resistant steel for forged bucket teeth
Wear-resistant steel for forged bucket teeth is a low-alloy steel that is used for applications such as engineering systems that require high abrasion resistance. It features excellent wear resistance, resistance to high temperatures, and other mechanical properties such as strength, hardness, and ductility.
The thermal deformation behavior of wear-resistant steel for forged bucket teeth has been studied in recent years in order to assess its ability to resist temperature-induced damage. By analyzing temperature–strain response of the steel, it is possible to identify temperature-dependent properties of the alloy.
Temperature-strain response
In order to determine the temperature-strain response of wear-resistant steel for forged bucket teeth, samples of the steel were subjected to a range of temperatures and strain rates. The results showed that the steel softened with increasing temperature and strain rate, and the low-alloy steel exhibited a greater strain rate sensitivity than similar alloys.
Temperature-Strain Response of Wear-Resistant Steel for Forged Bucket Teeth
At temperatures below 600°C (1112°F), the steel exhibited strain hardening with an increasing strain rate, as shown in Figure 1. At elevated temperatures, however, the steel began to soften rather significantly, with increasing temperature resulting in an increase in strain rate sensitivity of up to 30%. This rapid softening is a result of the transformation of the hardened microstructure of the steel.
At high strain rates and temperatures, the sample of wear-resistant steel for forged bucket teeth displayed a significant increase in the total strain rate, which is indicative of the strain rate sensitivity of the steel. This indicates that the steel undergoes significant softening and strain rate sensitivity at higher temperatures and strain rates, which is beneficial for applications requiring wear resistance and hardness.
Conclusion
The thermal deformation behavior of wear-resistant steel for forged bucket teeth was studied in terms of temperature and strain rate. The results of the study showed that the alloy displayed significant strain rate sensitivity and softening at high temperatures. The softening of the steel resulted in improved wear-resistance and hardness properties, which are beneficial for applications requiring these properties.
In conclusion, understanding the thermal deformation behavior of wear-resistant steel for forged bucket teeth is necessary in order to optimize the temperature and strain rate behavior of the steel. Such knowledge helps engineers achieve maximum performance with minimal manufacturing costs.
Conatct us
