Hardox 500 highly abrasion-resistant steel

Hardox 500 highly steel is a bendable and weldable abrasion-resistant steel, Hardox 500 hardness is very high, with a nominal hardness of 500 HBW. Hardox 500 Steel Plate is abrasion, wear and tear resistant steel. Suitable for applications that demand higher wear resistance.

Hardox 500 Steel Plates thickness can be from 3 mm to 130 mm. Hardox 500 is also known as BHN 500, AR 500 or AR500 steel.

Hardox 500 increases payload and increases service life while maintaining good processability and toughness. Hardox 500 highly abrasion-resistant steel can withstand high tensile strength shear forces.

Hardox 500 highly steel chemical properties:

Hardox 500	C%:	Si%	Mn%	P%	S%	Cr%	Ni%	Mo%	B%
Shee	0.27	0.50	1.60	0.025	0.010	1.20	0.25	0.25	0.005
Plate	0.30	0.40	1.30	0.020	0.010	2.20	2.0	0.40	0.005

The mechanical properties of hardox 500 are stated below:
Tensile Strength:450-1500 MPa
Yield Strength:330-1000 MPa
Hardness:around 500 HB

Hardox 500 tempering curve data predict that the material can be performed with heat treatments such as quenching, tempering, annealing, and normalization.

Hardox 500 highly abrasion-resistant steel  used to make heavy-duty machines which are used for tasks that require high tensile strength in the material. Eg: dump truck and JCB bucket, gears, etc.

---